คำอธิบาย
Insta360 Ace Pro 2 Dive Case 60m เคสลงน้ำลึก ของแท้
– Keeps Insta360 Ace Pro 2 waterproof down to 197ft (60m) when equipped.
– Glass lens for high-quality underwater images.
– New safe and stable design.
– Additional built-in 2-prong mount doubles your accessories and angles.
Compatibility
Insta360 Ace Pro 2
Insta360 Ace Pro 2 Dive Case
Capture underwater wonders.
197ft of protection.
Premium materials and sealant guarantee high-quality waterproofing.
Complete transparency.
Coated glass lens ensures optimum image clarity by minimizing reflection and repelling water.
All the angles.
Built-in vertical-horizontal 2-prong structure creates new shooting options and accessory combinations.
Safe and secure.
Sliding buckle lock mechanism is simple and reliable.
Fits like a glove.
Rigorous design and testing ensure the Dive Case fits Insta360 Ace Pro 2 perfectly.
In the Box
1x Dive Case
1x Protective Pouch
8x Anti-Fog Inserts
4x Anti-Slip Rings
1x 1/4″ Adapter
1x Thumb Screw
Specs
Dimensions:
108x87x46mm (4.3×3.4×1.8in)
Weight: 115g (+3g) (4.1oz (土0.1oz))
Materials: Plastic, glass
Preparation
1. Read the Dive Case manual thoroughly before use. Failure to observe and follow instructions may lead to damage for which Insta360 is not liable.
2. Update Insta360 Ace Pro 2 firmware before first use of Dive Case.
3. Removing the Wind Guard and Mic Cap from Insta360 Ace Pro 2 does not affect the camera’s waterproofing, but dampness may impact sound quality. Before using the camera with the Dive Case, remove the Wind Guard and/or replace it with the Mic
4. Before each use, latch the Dive Case without the camera inserted and check for leaks by following these instructions:
– Slowly submerge the latched Dive Case in water. Stop and remove if air bubbles escape from the case.
– While underwater, operate buttons for several minutes to ensure there are no air bubbles.
– Once the leak check is complete, remove the Dive Case from the water and dry thoroughly with a soft cloth.
– Open Dive Case and ensure inside is dry.
5. When sealing the Dive Case, ensure there are no foreign objects preventing the case and rubber seal being completely secured on both the body and rim.
6. Do not have the case open in locations with sand, dust and other particulate matter, as this may damage both the camera and case.
7. After latching the Dive Case, double-check that the seal is completely secure on both body and rim.
8. The Dive Case is not shock-resistant. Strong vibrations, impacts and applied pressure may darnage the case and reduce the waterproofing performance. When diving into water with Insta360 Ace Pro 2 in the Dive Case, the recommended maximum dive height is 6.6ft (2m) and drop distance onto a solid surface is 3.3ft (1m).
Notes
1. Do not open the Dive Case while it is wet.
2. After using product in salt water, remove the camera and soak Dive Case in fresh water for 5-10 minutes. Then, rinse gently under a faucet. Do not apply a high-pressure, single-direction water flow as this could cause a leakage.
3. Ensure there is no sand on the Dive Case before drying as it may scratch the surface.
4. Use a soft,dry cloth to ensure any residual salt and moisture has been removed from the Dive Case. Do not directly apply heat to the case as this may cause damage.
5. Do not clean the Dive Case with soap, natural detergent, alcohol cleaning products or organic solvents as this may degrade the case’s waterproofing.
6.Avoid contact with cosmetic products such as creams, lotions and makeup to prevent discoloring and staining the Dive Case.
7. Do not store the Dive Case in a hot and humid environment. In particular, do not leave it inside a hot car.
8. Store the Dive Case in a dry, well-ventilated location.
